The Grant Thornton International IFRS team has published three Insights into IFRS 3.

Mergers and acquisitions (business combinations) can have a fundamental impact on the acquirer’s operations, resources and strategies. For most entities, such transactions are infrequent and each one is unique. IFRS 3 Business Combinations contains the requirements for these transactions, which are challenging in practice. The standard itself has been in place for more than 10 years now and has undergone a post-implementation review by the IASB.

The Insights into IFRS 3 series summarizes the key areas of the standard, highlighting aspects that are more difficult to interpret and revisiting the most relevant features that could impact your business.

The next three publications in the Insights into IFRS 3 series present guidance on IFRS 3’s requirements for recognizing and measuring non-controlling interests (NCI), determining and measuring the amount of consideration transferred, and determining what is part of a business combination in cases where there are other transactions and arrangements between parties:

  • Insights into IFRS 3 – Recognising and measuring non-controlling interests;
  • Insights into IFRS 3 – Consideration transferred;
  • Insights into IFRS 3 – Determining what is part of a business combination transaction.

Next article

Starting in 2024, the AMT calculation will be significantly modified to better target high-income taxpayers.

The Alternative Minimum Tax (AMT) rate will be raised from 15% to 20.5% and the basic exemption will increase from $40,000 to approximately $173,000. In addition, the taxable income base used to calculate the AMT will be broadened. Québec will harmonize with these measures, using similar rate and exemption parameters.

These changes will impact high-income taxpayers, particularly individuals (and trusts) who realize a significant capital gain, especially one that is not eligible for the capital gains deduction (CGD).

Example: An individual who receives a salary of $150,000 and dividends of $100,000 and realizes a capital gain of $3 million on which a CGE of $971,000 is claimed in 2023 would not have to pay an AMT. That same individual would have to pay just over $100,000 in AMT under the new parameters, as of 2024.

An entrepreneur who sells his shares at the end of his career could end up paying a large AMT, with no possibility of recovering it if he has no other source of income after retirement, such as salary or RRSP withdrawals.

Since only 50% of non-refundable tax credits (including the charitable donation tax credit) will now reduce the AMT, these changes will affect taxpayers who make large donations. Individuals who receive a significant taxable benefit in connection with the exercise of stock options may also be affected, as such a benefit will now be considered 100% for AMT purposes (with no deduction).

AMT in brief

The AMT aims to ensure that all individuals (including trusts) pay their fair share of tax. It is a parallel calculation to regular tax that allows fewer deductions, exemptions and tax credits than the ordinary rules.

When filing their tax return, individuals must pay either the AMT or regular tax, whichever is higher. The additional tax thus payable in one year can be recovered over the following seven years, to the extent that the regular tax exceeds the AMT in those years.

Estimate the impact and plan ahead!

Some transactions scheduled for early 2024 may have to be brought forward or spread over 2023 and 2024 to limit the impact of these changes.

Consult your tax advisor to discuss these measures and assess their impact.

Next article

Taxation in Québec 2023: Favourable Measures to Foster Investment is a brochure intended for foreign companies considering investing in Quebec.

Produced by Investissement Québec in collaboration with our experts, this document summarizes the main tax measures that apply to companies operating in Québec. This brochure is for information purposes only. It does not substitute for legislation, regulations or orders adopted by the Québec government.

Our team of tax experts can meet your business needs. Contact us to achieve your full growth potential.

For more information, download the document below.

Next article

Maryse Janelle
Partner | Lawyer, LL.B., M. Fisc. | Tax

There are certain exceptions to the application or non-application of taxes on a transaction in the United States. What are these exceptions?

Retail sales of tangible personal property are generally taxable for U.S. sales and use tax purposes. However, even if a sale constitutes a retail sale, the transaction may be exempt for various reasons.

Exemptions vary from state to state and are, in some cases, based on criteria relating to the region’s economy. It is important to note that coordinating exemptions between several states can be complex due to variations in tax rules and taxation criteria.

Three situations where tax exemption is possible

Depending on the nature of the goods

In principle, there are three situations where tax is not applicable, the first being exemptions due to the nature of the goods. These transactions are not taxable per se and do not require any special documentation once it has been established that the object of the sale is a good or service that is not taxable.

For example, some states will not tax food products, while others will not tax medical products or certain types of clothing.

Depending on the buyer’s status

The second category includes exemptions linked to the buyer’s status. For example, churches, governments and certain charitable or educational organizations may be exempt from paying tax. In such cases, the seller must retain proof of its customer’s status under which the exemption applies.

It should be noted that some of these exemptions may be transferred to the exempt customer’s supplier. The rules vary from state to state.

Certain exemptions are based both on the buyer’s status and the nature of the transaction. In some cases, companies may benefit from temporary or specific exemptions for particular projects taking place in one or more States.

This could include exemptions for construction projects, temporary events or other specific activities that occur in one or more jurisdictions. For example, a company may obtain an exemption for a specific construction project or for a trade fair. Once the event is over, the exemption automatically expires.

Depending on the use of the good or service

Lastly, the third category includes various exemptions related to the buyer’s use of the property. These exemptions ensure that only the retail buyer, i.e., the consumer of the taxable good or service, will be liable to pay sales tax and that intermediaries will not have to pay additional taxes, which would result in double taxation.

For example, retailers will not pay tax on their stocks, but will pay tax on their counters and the goods used to promote them. The service provider will pay tax on its inputs, but will not have to charge tax on its services.

Most frequent exemptions

Exemption from sale for resale

By default, sales of tangible personal property are taxable. However, sales for resale are exempt in all states on the express condition that the supplier has the documentation justifying this exemption.

The resale exemption is the best-known retail sales tax exemption. Resale exemptions apply to goods acquired for resale in the same condition and may extend to goods used to become an integral part of a good to be resold. In general, if the property acquired for resale is ultimately used by the retailer, then the retailer will have to pay tax on that property.

Resale exemption certificates are used by resellers to purchase goods for resale without paying sales tax.

Some businesses are granted a direct payment permit by the State, which means that their suppliers do not have to charge them tax. These businesses will then have to pay the tax themselves when filing their tax returns for the period including when they consume or use taxable goods.

Exemption for manufacturing equipment

Manufacturing exemptions play an essential role in supporting the manufacturing sector by alleviating the tax burden associated with goods and services used in the process of manufacturing goods that will be resold.

In some cases, manufacturing exemptions may be partial rather than total. This means that specific goods or services will be taxable, but at a reduced rate. Rates and criteria may vary, adding to the complexity of the process.

Manufacturing exemptions are often linked to the specific use of goods and services in the manufacturing process. This means that in order to benefit from the exemption, the goods must be used directly in the production, processing or assembly stages. This exemption can cover both manufacturing equipment and components of the good that is produced and will be resold.

Goods that are not used directly and exclusively in the manufacturing process may not qualify for exemption. Determining when the manufacturing process begins and ends varies from state to state. These variations concern, for example, equipment used in research and development, packaging equipment, equipment used to move parts or goods during the process, and equipment linked to environmental or safety requirements.

Manufacturing exemptions can vary in terms of the parts and components used in manufacture. Sometimes, only parts and components that become an integral part of the final product benefit from the exemption, while parts used for the maintenance or repair of existing equipment are excluded.

Manufacturing exemptions often come with strict documentation requirements. Companies must be able to document that goods and services are used in accordance with the exemption criteria. This may include keeping accurate records, retaining invoices and receipts and preparing appropriate returns.

Exemptions for use in several states

Some states grant exemptions that apply to goods or services used in more than one jurisdiction. These exemptions generally apply to software in situations where, for example, an entity signs a contract with a software supplier for several licenses. The licenses are managed by the head office located in one state, but will be used by company employees in several states.

In such cases, some states allow the buyer (i.e., the head office) to provide a certificate of exemption for use in several states to its supplier so that the latter does not collect tax on the transaction; it will then be up to the buyer to pay the tax itself in the various states where the licenses will be used.

Documentation

Sellers who have an economic nexus in a state are responsible for collecting and remitting tax on its taxable supplies and, in the event of failure to do so, may have to pay the tax with penalties and interest. The burden of proof that the transaction is exempt, if applicable, therefore lies with the seller. If in doubt, sellers should generally collect the tax and buyers should request a refund from the tax authorities.

Each state has its own rules concerning exemption certificates and their renewal. Some jurisdictions require additional information when renewing, while others simply ask for confirmation that the information is still valid. It is essential to consult the local tax authorities for precise information on renewal requirements in each state, as validity periods vary from state to state.

It is important to regularly check the validity of the exemption certificates you hold. The rules are subject to change and it is possible that some states may require information to be updated or renewed. Additionally, changes in certain companies’ activities or structure may have an impact on their exemption eligibility.

Furthermore, it should be noted that some states do not allow sellers who are registered or required to be registered to simply receive a completed exemption certificate and rely on it to be relieved of their obligations if the sale is otherwise taxable. Indeed, these states will require sellers to be aware of the rules applicable in the state where they are doing business and to know whether the exemption actually applies depending on the particular goods being sold and the context. For example, some states may require sellers to pay tax on the supply of goods that are not subject to exemption, even if they have an exemption certificate duly completed and signed by the buyer.

When expanding into the US, it is important to understand the intricacies of the various exemptions and to ensure that you meet the eligibility criteria and documentation requirements. A thorough understanding of these limitations can help companies avoid costly mistakes and maximize tax benefits while maintaining full compliance with ever-changing regulations.

27 Sep 2023  |  Written by :

Maryse Janelle is a partner at Raymond Chabot Grant Thornton. She is your expert in taxation for the...

See the profile
[class^="wpforms-"]
[class^="wpforms-"]